Creality K1 Max 2025 Touch Screen Kit
Share on social media:
Your K1 Max 2025 boots, the fans run and the bed heats, but the screen stays black, flickers, or no longer responds to your finger. Without the display you cannot load filament, start the self-check or launch a print from the printer itself, and a large-format machine built for long jobs sits idle.
A cracked panel after a knock or a touch layer that has stopped registering both lead to the same fix: the factory screen designed for this exact printer. It plugs in with a flat cable and needs no firmware flashing.
Fit the Creality K1 Max 2025 touch screen and you have full local control of your 300 mm printer back in about fifteen minutes.
Genuine Creality part 4001050102 | Made for the K1 Max 2025 only | 4.3 inch colour touchscreen | 480 x 800 resolution | Capacitive touch panel | Flat-cable plug-in connection | No firmware flashing required
Who the K1 Max 2025 touch screen is built for
The large-format maker with a dead display
You bought the K1 Max for its 300 x 300 x 300 mm build volume, and you use the screen to load filament, run calibration and check on jobs that run for many hours. This replacement restores that control with the original Creality part, so menus and touch response behave exactly as before. Swap it in the evening, run the self-check, and start a full-size cosplay helmet section printing overnight.
The small print farm operator
Even when you send jobs from Creality Print over the network, someone still has to stand at the machine to change filament, clear an error or confirm the bed is empty. On a farm of several Creality K1 Max 2025 3D printers, one dead screen takes a high-capacity machine out of rotation. Keeping a spare on the shelf turns that failure into a short bench job instead of a week of lost output.
The school or makerspace technician
Shared printers get prodded by many hands, wiped with the wrong cloth and bumped by bags, and the display usually takes the damage. The screen mounts at the front of the frame and connects with a single flat cable, so your technician can replace it in-house without sending the printer away. Learners lose a lesson, not a term, and the repair doubles as a practical look at how the printer's electronics connect.
What sets the K1 Max 2025 touch screen apart
A sharper display than the original K1 Max screen
The K1 Max 2025 screen fits 480 x 800 pixels into a 4.3 inch LCD panel, double the pixel count of the 480 x 400 screen on the original K1 Max. Text is crisper, icons are easier to tap, and temperatures, fan speeds and print progress are readable at a glance. On a printer that runs long, large jobs, that clarity helps when you are deciding from across the room whether a twelve-hour print needs attention or can be left alone.
Touch that responds like your phone
The panel uses capacitive sensing, the same principle as a smartphone, so a light tap registers without pressing hard. You get quicker navigation through Creality OS, the Klipper-based firmware that runs the K1 Max 2025, and less mechanical wear on the panel over time. Temperature, motion, filament loading, calibration and network settings are all controlled from this screen, so a reliable touch layer keeps the printer usable without a laptop next to it.
The right part for the 2025 hardware revision
The K1 Max 2025 is not electrically identical to the original K1 Max. Creality uses a different display and a model-specific flexible flat cable on the 2025 version, and its original K1 Max screen kit is marked as not suitable for the K1 Max 2025. This kit, part 4001050102, is specified for the 2025 model, so you avoid the most common mistake buyers make when ordering a K1 Max screen online.
Plug in, power up, print
No soldering, no firmware file and no reconfiguration. With the printer switched off and unplugged, you release the old display, disconnect the flat cable, connect the new screen with the cable oriented correctly, and refit it to the frame. The printer recognises the display on the next boot. Most owners finish in around fifteen minutes with basic hex keys, and your calibration data, network settings and print history stay exactly as they were.
Know which screen part you actually need
Creality sells several similar-looking screens for the K1 family. Use this table to confirm you are ordering the right one.
| Part | Resolution | Fits | Fits K1 Max 2025? |
|---|---|---|---|
| K1 Max 2025 Touch Screen Kit (this part, 4001050102) | 480 x 800 | K1 Max 2025 | Yes |
| K1 Max Touch Screen Kit (4001050080) | 480 x 400 | K1 Max (pre-2025) | No |
| Creality K1 Touch Screen Kit | 480 x 400 | K1, K1C (pre-2025), K1 SE, Ender-3 V3 Plus | No |
| Creality K1C 2025 Touch Screen Kit | 480 x 800 | K1C 2025 | No, model-specific cable |
Full specifications: Creality K1 Max 2025 touch screen
| Spec | Value |
|---|---|
| Display | |
| Screen size | 4.3 inch |
| Resolution | 480 x 800 pixels |
| Panel type | Colour LCD |
| Touch technology | Capacitive |
| Hardware | |
| Brand | Creality |
| Creality part number | 4001050102 |
| Store SKU | CRE800 |
| Connection to mainboard | Flexible flat cable (K1 Max 2025 specific) |
| Installation | Plug-in, no soldering, approx. 15 minutes |
| Compatibility | |
| Fits | Creality K1 Max 2025 |
| Does not fit | K1 Max (pre-2025), K1, K1C, K1C 2025, K1 SE, Ender-3 V3 Plus |
| Printer build volume (reference) | 300 x 300 x 300 mm |
| Software | |
| Firmware | Creality OS (Klipper-based), no flashing required |
Ordering, shipping and support for your K1 Max 2025 screen
We courier the K1 Max 2025 touch screen anywhere in South Africa, or you can collect it from our Centurion or Boksburg store. Warranty claims are handled locally by our own team, not sent offshore. If you are not sure whether the fault is the screen, the cable or the controller board, our technicians can help you diagnose it first. Filament and other Creality spare parts ship from local stock.
Frequently asked questions about the K1 Max 2025 touch screen
Will the original K1 Max touch screen fit my K1 Max 2025?
No, it will not. Creality marks the original K1 Max screen kit as not suitable for the 2025 version, which uses a different display and cable. To confirm your model, check the label on the back of the printer or the device information in the screen menu. If it says K1 Max 2025, this is the screen you need.
Do I need to update firmware after replacing the screen?
No, the new screen works on the next boot. Creality OS recognises the display automatically. Always switch the printer off and unplug it before connecting or disconnecting the flat cable, because hot-plugging the display is a common way owners damage a new screen or the mainboard connector.
My screen is blank, but is the screen really the faulty part?
Not always, so check the connection first. Owners frequently trace a blank, flickering or garbled display to a flat cable that has worked loose or been creased at the connector. Power down, reseat both ends of the cable with the locking tabs fully closed, then restart. If the fault persists, or the panel is cracked, replace the screen.
How do I keep the new screen working for longer?
Treat it like a phone screen. Clean it with a soft, dry microfibre cloth, never solvents or the IPA you use on your build plate. Avoid pressing with fingernails or tools, and do not lean spools or parts against the display. When moving the printer, protect the front panel and avoid lifting the machine by the frame next to the screen.
Is there local warranty support in South Africa?
Yes, warranty claims are handled locally by our team. If you need help before you buy, submit a technical support ticket with your printer model and a photo of the fault, and we will help confirm you are ordering the right part.