Bambu Lab Silicone Sock for A1/A1 Mini, Pack of 3
Share on social media:
Leave an A1 or A1 Mini running without a silicone sock for long enough and you will notice it in the ooze, a crust of scorched filament building up around the heater block, heat escaping sideways instead of staying in the nozzle, and eventually a print that will not release cleanly from a hotend caked in residue. It is a small part doing a job that is easy to overlook until it stops doing it.
This is the genuine Bambu Lab silicone sock for the A1 and A1 Mini, part number FAH006, sold in a pack of three because a sock exposed to the nozzle's heat and constant filament contact wears out well before most other parts on the printer.
Genuine Bambu Lab part, FAH006 | Pack of 3 | Rated to 300°C | Black high-temperature silicone | Fits Bambu Lab A1 & A1 Mini | Insulates and keeps the heater block clean
Who the Silicone Sock is built for
The owner doing routine hotend maintenance
A silicone sock hardens, discolours, and eventually tears with normal use, and a worn one is easy to miss until print quality starts drifting. Keeping a spare on hand means a five-minute swap the moment you notice residue building up, rather than printing on a hotend that is losing heat it should be holding onto.
Schools and institutions maintaining a fleet
Consumables like this are the kind of part that gets forgotten in a maintenance budget until several printers need one at once. Buying genuine Bambu Lab socks in a pack of three, rather than one at a time, makes it easier to keep a small stock on hand for a lab or classroom running multiple A1 or A1 Mini units.
The print farm operator stocking consumable spares
Running several A1 series printers means socks wear out on a rolling basis across the fleet. A pack of three genuine socks costs less per unit than buying single replacements repeatedly, and keeping a small stock on the shelf means a worn sock never becomes a reason to pause a print queue.
What sets the Silicone Sock apart
Genuine Bambu Lab fit, no guesswork
This sock carries Bambu Lab's own part number, FAH006, and is moulded to the exact profile of the A1 and A1 Mini heater block. A loose or ill-fitting generic sock can shift during printing and expose part of the heater block, undoing the insulation benefit it is meant to provide, this one seats correctly every time.
Keeps heat exactly where it belongs
The silicone is rated to 300°C, matching the A1 series' full nozzle temperature range, and wraps the heater block to reduce heat loss to the surrounding air. A hotend that is not fighting heat loss holds its set temperature more consistently, which shows up directly in first-layer adhesion and overall extrusion stability.
Stops filament ooze from bonding to the heater block
Without a sock, oozing filament sticks directly to the metal of the heater block and hardens there, gradually building up a crust that is awkward to clean and can interfere with nozzle changes. The silicone surface sheds that residue far more easily, keeping the heater block accessible and clean between maintenance sessions.
Three in a pack, because socks wear faster than most parts
A silicone sock sits closer to sustained heat and direct filament contact than almost anything else on the printer, so it wears out well before the hotend or heating assembly beneath it needs attention. Selling it in a pack of three reflects how this part is actually used, as a consumable you replace periodically, not a one-off purchase.
A five-minute job with no tools required
Fitting a new sock means removing the old one from the heater block and pressing the replacement into place, following Bambu Lab's official maintenance guide. No tools, no wiring, and no need to power down for an extended period, making it one of the simplest maintenance tasks on the whole printer.
Full specifications
| Spec | Value |
|---|---|
| Manufacturer | Bambu Lab, genuine OEM part |
| Part number | FAH006 |
| Compatible printers | Bambu Lab A1, Bambu Lab A1 Mini |
| Pack quantity | 3 x Hotend Silicone Sock |
| Material | High-temperature silicone |
| Colour | Black |
| Maximum temperature rating | 300°C |
| Function | Insulates heater block, prevents filament residue build-up |
| Installation | Toolless, presses over the heater block |
| Fitment | Factory-original, matches A1/A1 Mini heater block profile exactly |
How the Silicone Sock compares to other options
| Spec | Genuine Bambu Lab Sock, this product | Generic Aftermarket Sock | Running Without a Sock | Bambu Lab Silicone Sock, P1/X1 Series |
|---|---|---|---|---|
| Fit | Exact, factory profile | Close, minor variance possible | Not applicable | Exact, factory profile |
| Temperature rating | 300°C | Varies by supplier | Not applicable | 300°C |
| Heat retention | Good, consistent insulation | Good if seated correctly | Poor, heat loss to surrounding air | Good, consistent insulation |
| Residue build-up | Sheds ooze easily | Sheds ooze reasonably well | Bonds directly to heater block | Sheds ooze easily |
| Compatible printers | A1, A1 Mini | A1, A1 Mini | A1, A1 Mini | P1P, P1S, X1C |
| Ideal buyer | Owners wanting a certified, exact-fit consumable | Budget one-off replacement | Not recommended long-term | P1/X1 series owners |
| Price tier | R89.99 for 3 | Lower tier, per-unit variance | No cost, but shortens hotend life | Separate part, similar tier |
Materials and software
Filaments this accessory supports
The silicone sock is not filament-specific, it protects the heater block regardless of what you are printing. It is most noticeable with materials that ooze readily, such as PLA and PETG, where the sock keeps stray filament from bonding to bare metal. For ABS, ASA, and TPU, the insulation benefit matters more than the residue protection, since a stable hotend temperature improves layer adhesion across all of these materials. The 300°C rating covers the full range of filaments the A1 and A1 Mini can print, so there is no material on this printer that falls outside what the sock is rated for.
Slicers and software
This is a passive thermal and physical accessory with no interaction with slicer software, Bambu Studio, OrcaSlicer, or any other slicing tool. It does not require any settings changes, calibration, or nozzle information updates on the printer's touchscreen after installation.
What's in the box
- 3 x genuine Bambu Lab silicone socks, FAH006
- Rated to 300°C, black high-temperature silicone
Ordering, shipping and support
This genuine Bambu Lab silicone sock pack ships nationwide across South Africa by courier from 3D Printing Store's Centurion and Boksburg locations. It is covered under 3D Printing Store's standard warranty for genuine Bambu Lab parts, handled locally through their South African support team rather than an overseas RMA process. Hot ends, heating assemblies, and other A1 accessories are available from the same store, making it easy to keep a full set of consumables in stock.
Frequently asked questions
Is a genuine sock better than a generic replacement?
A genuine sock is moulded to the exact profile of the A1 series heater block, so it seats correctly and stays in place. A poorly fitted generic sock can shift during printing and expose part of the heater block, reducing the insulation benefit it is supposed to provide.
Can this sock handle ABS, ASA, and other high-temperature filaments?
Yes. It is rated to 300°C, which covers the full temperature range of the A1 and A1 Mini across PLA, PETG, ABS, ASA, and TPU. There is no filament this printer supports that exceeds the sock's rated temperature.
How long does it take to install?
Fitting a new sock takes a few minutes. Pull the worn one off the heater block and press the new one into place, following Bambu Lab's official maintenance guide, no tools or wiring are involved.
How often does the silicone sock need replacing?
It depends on print volume, but a sock in regular use typically shows discolouration, hardening, or minor tearing well before other hotend components need attention. Buying a pack of three means you are not reordering every time one wears out.
Does it come with a South African plug and local warranty support?
This is a passive silicone accessory with no electrical component, so no plug is required. It is backed by 3D Printing Store's local warranty support for genuine Bambu Lab parts, handled through their Centurion and Boksburg branches rather than an international claims process.