3DX Tech CarbonX Nylon Filament, 1.75mm, 0.5kg, Black
Share on social media:
3DX Tech manufactures high performance 3D printing filaments. This Generation 3 CarbonX™ CF-Nylon Filament is formulated using a PA6 Nylon copolymer reinforced with high-modulus carbon fibers. This filament is ideal for anyone that desires a structural component with high modulus, improved chemical and thermal resistance, excellent surface quality, and ease of printing. Gen3 has higher Heat Deflection Temperature than our previous grades (147°C at .45MPa) allowing for expanded use in higher-temp applications.
This filament is ideal for engineering applications where high mechanical strength and stiffness are required, high temperature resistance and high chemical resistance. You do not need to purchase a special printer for CarbonX™ CF-Nylon. This CF Nylon (Gen 3) filament was engineered for use in practically any desktop 3D Printer that has a heated bed.
Please note: This filament is very abrasive due to the fibers in the filament. Please use a hardened nozzle when printing.
Specifications:
- Material weight: 0.5kg
- Filament diameter: 1.75mm
- Printing temperature: 240-270 Deg C
- Bed Temperature: 80-110 Deg C
- Printing bed: Polyimide Tape, Clean glass with ABS/Acetone Slurry
- Tensile strength: 63 MPa
- Flextural Modulus of Elasticity: 3750 MPa
Nylon absorbs moisture from local humidity. If you hear a popping sound or see steam coming from the nozzle during printing, dry the filament by heating it in an oven to 80 Deg C for at least 4 hours. For detailed drying instructions from 3DX Tech, please view here.
For the Technical data sheet, please view here.